Several things causing failure of overclock processor 28 Comment

Several things causing failure of overclock processor :

1. Memory generally most dominant. When overclock processor, memory have to make balance to the speed processor.
2. Abundant heat at processor when using heatsink standard.
3. Lacking of energy at processor, because mainboard or power supply which is not adequate.
4. Ability Mainboard which do not support, or do not designed for the overclock processor.
5. Peripheral ability "other hardware" unable to put hand to the speed processor after overclock.

Readmore...

Preparation and Step Overclock Processor 9 Comment

Overclock processor is activity of "trial and error" or "try and try". Preparation and step which must be done :

1. Earliest phase is you have to know where place conduct the reset BIOS, if computer locked.
   
2. Something else is patience. Doing the increase of speed processor in phase for the step by step. Improvement redundantly will only confuse your analysis. Conducting overclock slowly will be more easy to succeed, and analyse whether computer have earned to work better. And you running some application, whether all have walked normal before improving higher speed processor again. If happened by the failure take example the computer experience of the hang, blue screen or fail to run the certain application.Return to analyse at shares hardware. And look, where making computer fail done by overclock processor.
   

Readmore...

Three Important Matter, After Overclock Processor 6 Comment

Three important matter, after we conduct overclock processor :

1. Processor have the certain limitation of speed, its speed excelsior hence hot progressively, and unstable. Facing heat can only be faced with the good cooler system. Changing certain type cooler will take care of the successfulness when doing overclock.
2. Excelsior Multiplier a processor will be unstable progressively. Generally, them which wish to do the overclock take the initiative by way of buying low processor bermultiplier. By multiplier lower, hence speed processor have the percentage of higher, and cheaper of course.
3. Energy of Power processor. We recognize by overvoltage. By enhancing voltage to processor will take care of the stability computer. When overclock conducted] at fair boundary, overvoltage seldom be done. But, at overclock extreme, overvoltage generally become the taken last choice. Its impact, hot processor progressively. Why overvoltage conducted ?? Faster processor, ever greater or power energy required. By adding power supply to processor with the improvement of voltage or overvoltage will give the power which enough, when speed processor of above standard speed. To increase energy to procesor, at BIOS setup, there are option Vcore. this Number Vcore played by processor to become more stable.

Readmore...

What Doing to Overclock Processor ?? 6 Comment

Easy to conduct the overclock processor, but its impact enough wide of to other hardware.
If studying existing computer in this time, doing overclock processor will affect to hardware of like system I/O, VGA and other.
Doing overclock a processor of any MHZ also will race the other shares performance like memory, PCIE, PCI And AGP clock.
Its meaning when procesor with the bus speed 100MHz raced to become 120MHz (20%), hence other speed clock hardware also increase.
Also speed memory will be raced to follow the speed processor that is around 20%.

Many error happened to beginner because they are not too recognizing of calculation, ability and also definition from hardware.
We have to beware in conducting overclock, one of the matter which require to be prepared is cooler and fan (if needed), because processor raced above standard. Readmore...

How Overclock Processor ? 9 Comment

Overclock in fact conduct the setup of speed of clock CPU at BIOS.
When processor with the speed 1.6Ghz with the bus 100Mhz, its meaning is processor put hand to the speed 16X100Mhz will release the speed processor 1600Mhz or 1.6GHz.
By altering bus at option BIOS, for example from 100Mhz becoming 133Mhz hence computer will work with the speed 2.1GHZ or 16X133Mhz with the result 2.1Ghz or 2.128Mhz.

Whether in such a way easy to do the overclock ??? Right, only by this is computer can be raced and in such a way easy to someone conduct overclock a processor. Readmore...

What Target of Overclock Processor 4 Comment

Especial Target of overclock is race a processor VGA and quicker work CPU.
For example someone wish the computer owned, although use the cheaper processor.
Its speed can come up to the computer owning costlier processor.
There is also special target becoming trend after year 2000.
For example application game.
By overclock , a computer will be more quickly and enjoyed balmier.
By overclock, all peripheral will mount its function.
Last function this is target most commonly used.
Because available of additional peripheral is almost everything made available.
Also supported by company mainboard for the input of system overclock at BIOS.

Unhappily, at the time not yet all growth have perfected.
Because still the limited peripheral of like memory, mainboard and heatsink which do not as complete as this time. Readmore...

Quickening Activy Processor with Overclock 3 Comment

Overclock become the foreign term to a beginner interested by hardware.
But for the man who have skilled is area hardwawe, the term represent a standard term and used in everyday life.
Term Overclock compiled from two word that is over and clock with the meaning conducting setup mainboard clock to processor and also a VGA.
overclock interpreted by making quicker computer.
Overclock start conducted when processor 486 DX and first Classic Pentium. But racing processor can only be conducted by jumper at mainboard.
For example Pentium 166Mhz dijumper become the speed 200Mhz, difference pittance of between 166Mhz and 200Mhz.
But fair to middling enough for the speed of in this year.
Noise Overclocker started at 1997 when Intel release the processor type of Celeron have speed 300Mhz with the slot type 1 and raced to crowded multitude become 450Mhz.
Moment of that's emerging all overclocker which start to race the last processor to a point.
A Company, what that moment have mastered the area hardware make the mainboard by option is setting able to by user.
Appearance Abit by mainboard for the setup of via BIOS and mainboard jumperless.
First Abit announce the mainboard by jumper minimize and user can do setup at BIOS for the speed of processor. Readmore...